[comp.sys.ibm.pc.misc] SCO ODT Driver For Tseng ET4000 SVGA Cards?

jerry@polygen.uucp (Jerry Sheckel) (02/14/91)

Hello.  I have a Tseng ET4000-based graphics card -- the Diamond SpeedSTAR
SVGA w/1MB RAM.  I've been using it with ODT's driver for the Orchid Designer
card, which was based on the earlier ET3000 SVGA chipset.  My old monitor,
an original NEC Multisync, had a vertical hold control which could be used to
adjust the display to a stable (and fuzzy) 800x600 resolution.  My new monitor,
a Seiko 1440, does not have such a control, and the display is all screwed up
in 800x600 X-Windows.  I know the problem is not the monitor/card combination,
since MS-Windows runs fine at 800x600.  But I do need an updated driver (.xgi
file).  Does one exist?  If so, I would greatly appreciate any information on
where to get it.
--
+-------------------+----------------------+---------------------------------+
| JERRY J. SHEKHEL  | POLYGEN CORPORATION  | When I was young, I had to walk |
| Drummers do it... | Waltham, MA USA      | to school and back every day -- |
|    ... In rhythm! | (617) 890-2175       | 20 miles, uphill both ways.     |
+-------------------+----------------------+---------------------------------+
|           ...! [ princeton mit-eddie bu sunne ] !polygen!jerry             |
|                            jerry@polygen.com                               |
+----------------------------------------------------------------------------+