wdieteri@wrdis01.af.mil (Dieterich) (04/10/91)
We have an Advanced Logic Research 386/220 computer. We are needing to add an additional 4-Megs of memory to this. There are two 32-bit slots that are designed for memory boards. The manual describes these board, but after looking for them they cost is excess of $500 with 0K. Are they any other board thtat are cheaper that can be used with this system, and in thoses slots for 32bit mem, or do I need to just get a standard AT compatible 16-bit slot board and use that in one of the other slots. Will Dieterich Internet: wdieteri@wrdis01.af.mil ========== long legal disclaimer follows, press n to skip =========== ^L Neither the United States Government or the United States Air Force or any of their employees, makes any warranty, whatsoever, implied, or assumes any legal liability or responsibility regarding any information, disclosed, or represents that its use would not infringe privately owned rights. No specific reference constitutes or implies endorsement, recommendation, or favoring by the United States Government or the United States Air Force. The views and opinions expressed herein do not necessarily reflect those of the United States Government or the United States Air Force, and shall not be used for advertising or product endorsement purposes.