andy@bria.UUCP (Andy Smith/4096) (04/16/91)
Hello fellow Netters: I recently purchased an IBM PS2-30/286 w/1MB, 30MB Harddrive, and a 1.44MB 3.5 floppy. I would like to add externally a 1.2MB - 5.25 floppy, a full size cartrage tape, and another harddisk, and possibly others in the future. My question is what is the best and most economical way to do this? I have looked through the Computer Shopper and have seen adds for boxes for external drives w/ & w/o power supplies. If I purchase one w/o a power supply, where do I get a power supply? Can I use the same ones advertised for the PC's themselves? Considering that I would have to buy at least 2 of these external boxes, would it be better to just buy a PC case? From what I've seen in the add's, it looks like it would be even money to buy a Full Size 5 bay Case and use a standard 200W power supply. Also what would be the best choice for a second harddrive? Any and all suggestions, hint's, comments will be greatly appreciated. Thank you in advance for your helpful consideration. --------------------------------------------------------------------------------| Andy Smith Disclaimer: All statements expressed here|| Briareus Corporation are my own and not those of my employer || 5777 West Century Blvd. Suite 1000 or his affiliates. These statements do || Los Angles, CA. 90045 not, to the best of my knowledge, || (213) 641-3330 fax (213) 338-0820 contain or are based on restricted || andy@bria!uunet ...!uunet!bri a!andy information. ||______________________________________________________________________________|