victor@walt.cc.utexas.edu (Victor Menayang) (04/30/91)
My 386-25 machine has a memory page interleaving capability,
but I noticed that if I install an extended memory manager
(e.g. himem.sys) this capability is disabled.
Is there any way I could get them both work>
Any help should be greatly appreciated.
Configuration: 386-25, 8mb RAM, AMI BIOS, DOS 4
Victor Menayang victor@ccwf.cc.utexas.edu (Internet)
vm@UTXVM (BITNET)
...!cs.utexas.edu!ut-emx!rtf1000 (UUCP)
-------------------------------------------------------------vanmick@hpsgm2.sgp.hp.com (Van Der Beek Michael-Leo) (05/06/91)
Hi, I too have an AMI bios and running Dos 4.01, how did you detect your memory page interleave is turned off? I am running QEMM 5.11 as a memory manager, I also have a Syquest driver and now experimenting with stacker to see if it works in a Syquest cartridge (need to store 30Mb of gif files ;-) The shop I bought my computer from says that I cannot change my 4Mb ram (using 256K simms) to 1Mb simms because I loose the memory interleave. As with the question above how do I detect it is functioning in the first place. Thanks alot. Regards, Michael
plim@hpsgwp.sgp.hp.com (Peter Lim) (05/13/91)
/ vanmick@hpsgm2.sgp.hp.com (Van Der Beek Michael-Leo) / 10:14 am May 6, 1991 / writes: > I too have an AMI bios and running Dos 4.01, how did you detect your > memory page interleave is turned off? I am running QEMM 5.11 as a memory > manager, I also have a Syquest driver and now experimenting with stacker to > see if it works in a Syquest cartridge (need to store 30Mb of gif files ;-) > If you want to store GIF files, stacker will not help at all. The compression ratio would be around 1:1. Stacker also doesn't work well with LHARC files. Regards, ___o``\________________________________________________ ___ __ _ _ Peter Lim. V````\ @ @ . .. ... .- -> 76 MIPS at under US$20K !! --- -- - - /.------------------------------------------------ === == = = >--_// . .. ... .- -> 57 MIPS at under US$12K !! `' . If you guessed SUN, IBM or DEC, you are wrong ! E-mail: plim@hpsgwg.HP.COM Snail-mail: Hewlett Packard Singapore, Tel: (065)-279-2289 (ICDS, ICS) Telnet: 520-2289 1150 Depot Road, Singapore 0410. #include <standard_disclaimer.hpp>