mholtz@sactoh0.sac.ca.us (Mark A. Holtz) (05/20/91)
I am using a *REGISTERED* version of Telemate 2.11. I am trying to
configure the following script to login to a local Unix box. This
is my (non-working) script).. . .
BEGIN---cut here---cut here
;
;Telemate Learn Script generated on 4-02-91
;
Waitfor 5 ; wait until string matched
Put "^M^M^M"
Waitfor "login:"
Put "mholtz"
Waitfor "Password:"
Put "^&^M"
END---cut here---cut here
What I want to do is, after dialing into the system, is to wait 5
seconds, then send a ^M. If I don't get a "login:" prompt within 3
seconds, then I want to send a ^M again, and wait to see if I get
"login:" again (a loop in effect). If I do get a login, the script
should generate the "mholtz" as shown above. . . .
I appreciate any help. Thanks in advance!
--
Wish list of items: /\ UUCP: ames att!pacbell! \
* Unix Box with Hard Drive \/ pyramid sun!pacbell! -=> sactoh0!mholtz
* 9600 Baud V.32/V.42 Modem /\ ucbvax!csusac! /
* A much-needed vacation \/ INTERNET: mholtz@sactoh0.SAC.CA.US