Jim Gerlach <GERLACHJ@QUCDN.QueensU.CA> (05/29/91)
I have just hooked up an HP LaserJet IIIP to two IBM PS/2 computers (30-286 and 50Z) using a Logical Connection Jr. printer sharer. The LC Jr uses serial connections at 115,000 bps. This requires redirection of the output from the parallel port to COM1:. In order to keep LPT1: available for our HP PaintJet I have configured the IIIP as LPT2: (MODE LPT2:=COM1:). However, we have a couple of old programs that do not support redirecting output to LPT2:. Is thre any way of redirecting PRN to LPT2: or COM1:? It would also be nice to be able to use PrintScreen on the IIIP. I have access to both CompuServe and Simtel if any programs exist there. Thanx in advance for any help. Jim Jim Gerlach - Cancer Research Laboratories James.H.Gerlach@QueensU.CA Queen's University GERLACHJ@QUCDN.QueensU.CA (NetNorth/BITNET) Room 358, Botterell Hall tel (613) 545-6446 Kingston, Ontario fax (613) 544-9708 CANADA K7L 3N6