gnu@hoptoad.uucp (John Gilmore) (08/28/90)
One thing that came up at Crypto '90 was a short paper from Ms. Helen
Bergen at Queensland U. in Australia. She noticed the 'locked
document' commands in Word Perfect, used by all the secretaries in her
dept., and looked to see how strong it was. It turned out that the
MSDOS DEBUG command and an envelope for scratch paper are enough for
anyone to decode both a document AND the key used for it! Word Perfect
Corp. didn't care about her results (letter reproduced below), but I
thought that some Word Perfect losers, I mean users, here on the net
might want to know.
You should consider WP locked documents like ROT13: fine to keep the
text garbled until you type a command, useless for keeping things private.
John Gilmore
From: <CSZBERGEN@qut.edu.au>
Date: Mon, 27 Aug 90 10:28 +1000
To: cygint!gnu
Dear John,
Here is the letter and a copy of the Latex source of my paper. It
will be published in CRYPTOLOGIA in the near future. Thanks for your
interest,
Regards,
Helen Bergen
****************************************************
Quote from letter received from WordPerfect Pacific:
Thankyou for the copy of your paper entitled "File Security in
WordPerfect 5.0". I sent a copy of the paper to WordPerfect Corporation
in the USA and recently received a reply from them.
They confirmed that people have written programs to break the password.
However, WordPerfect Corporation does not have such a program and
therefore has no way of breaking it. They also pointed out that very
few users would know how to write such a program.
It is possible that the manual may be amended in a future edition to
clarify the protection that a password gives. They recommend that
anyone concerned about security may want to take higher precautions
than the password protection.
Thankyou for your interest in WordPerfect
********************************
FILE SECURITY IN WORDPERFECT 5.0
H.A. Bergen School of Computing Science
W.J. Caelli Information Security Research Centre
Faculty of Information Technology
Queensland University of Technology
G.P.O. Box 2434, Brisbane, Q 4001, AUSTRALIA
ABSTRACT: Cryptanalysis of files encrypted with the 'locked document'
option of the word processing package WordPerfect V5.0, is shown to be
remarkably simple. The encryption key and the plaintext are easily
recovered in a ciphertext only attack. File security is thus
compromised and is not in accord with the claim by the manufacturer
that: "If you forget the password, there is absolutely no way to
retrieve the document".
KEYWORDS: Cryptanalysis, WordPerfect.
INTRODUCTION
WordPerfect is one of the most popular word processing packages in use
today. It has a 'locked document' option which aims at protection of a
WordPerfect file from unauthorised access. The manual states "You can
protect or lock your documents with a password so that no one will be
able to retrieve or print the file without knowing the password - not
even you". The manual also claims that "If you forget the password,
there is absolutely no way to retrieve the document" [1].
This option is used to 'add' a password to an existing or newly created
WordPerfect file. The file is then encrypted using the password as the
cryptographic key, and is stored on disk. Any subsequent retrieval or
printing of the file via WordPerfect requires the entry of the correct
password. With the increasing use of distributed file systems and
sharing of data, this option might appear to be an attractive means of
protecting sensitive files, particularly where they may reside on a
shared network server. It is easily implemented without the expense
and installation of another software protection/encryption package.
The encryption algorithm used in the WordPerfect 4.2 version, however,
was successfully cryptanalysed by Bennett [2]. He concluded that the
encryption system was unsatisfactory for protection of sensitive
documents.
The present study extends this work to an investigation of the security
of the WordPerfect 5.0 encryption system on both the IBM PC and DEC VAX
systems as well as WordPerfect 5.1 on the IBM PC.
WORDPERFECT FILES
WordPerfect version 5.0 was used on an IBM-PC and other compatible
systems to create various files consisting of original documents and
their associated ciphertext with different passwords. The DOS utility
DEBUG was used to display the content of the files in hexadecimal
notation.
The WordPerfect files were created on three different systems. By this
we mean, three different licenced copies of WordPerfect running on
different Personal Computers with different printers. An example from
just one of these systems has been given in detail.
Version 4.2 format
Files created under 4.2 contain just the ASCII representation of the
character text. Printer definitions and setup parameters are in
separate files and are used only when the file is to be printed.
For example, a file may contain zeros (ASCII code 30 hex) and new line
characters (these are converted to the ASCII line feed character, 0A
hex). The plaintext file in hexadecimal would be
30 30 30 30 30 30 30 30 30 30 0A
30 30 30 30 30 30 30 30 30 30 0A
30 30 30 30 30 30 30 30 30 30
The corresponding ciphertext file with a key value of the ASCII letter A is
FE FF 61 61 41 00
73 72 75 74 77 76 79 78 7B 7A 47
7C 7F 7E 61 60 63 62 65 64 67 5C
69 68 6B 6A 6D 6C 6F 6E 51 50
Encrypted files contain an extra 6 bytes, shown in the first line of
the above. The first 4 bytes are constant for all keys and are used by
the WordPerfect program to determine whether the file is plaintext or
ciphertext. The latter 2 bytes contain a checksum derived from the
key, as described by Bennett [2].
For example,
FE FF 61 61 43 00 key = C
FE FF 61 61 71 C0 key = AA
Version 5.0 format
Files created under version 5.0 are stored in a different format. With
the default WordPerfect format, the file contains the document text
appended to printer setup information. There are other options to save
the file in DOS text format or in 4.2 format, and in these the printer
information is omitted. For example, a document containing 32
characters of text is saved in 5.0 format as a file of approximately
600 - 1000 bytes (depending on the particular printer system) and in
4.2 or DOS format as a file of 32 bytes.
The locked document option in version 5.0 allows encryption of files
only in WordPerfect format, the one containing all the printer
information.
* All version 5.0 files, original and encrypted forms have
the same four characters in byte positions 0 - 3 :
FF 57 50 43 (HEX)
or W P C (ASCII)
These codes were unchanged for files created on three different
systems, i.e., three different licenced copies of WordPerfect 5.0 on
three different PC's using different printers.
* BYTES 4 - 7 are related to the offset address of the text, ie. the
start of the document text.
* BYTES 8 - 11 are constant for all files:
01 0A 00 00
* ENCRYPTED TEXT STARTS HERE
* BYTES 12 - 15 are constant for a plaintext file:
00 00 00 00
For an encrypted file, however, bytes 12 and 13 in the above contain a
checksum related to the key value used. This checksum appears to be
the same as that used in the 4.2 version [2].
* BYTES 16 - 21 were constant for files prepared on the three
different systems and contained:
FB FF 05 00 32 00
* BYTES 22 - 31. Of these 10 bytes, 22, 23, 28 are file and system
dependent, but bytes 24, 26, 29, 30, 31 are constant with value 00.
* BYTES 32 - 39 were constant for files prepared on the three
different systems and contained
42 00 00 00 02 00 56 00
* BYTES 40 - 47. Of these 8 bytes, 42, 46, 47 are file and system
dependent, but bytes 40, 41, 43, 44, 45 are constant with value 00.
* The remaining bytes of the printer header information are
dependent on the particular hardware and printer in use. These might
change according to the printer setup values.
* The remaining bytes are document text. The offset address in
bytes 4 - 5 gives the start of the document text. This is dependent on
the size of the printer information and this can obviously change from
one system to another.
* Other systems may well have different printers or setup parameters
which change some of the bytes that we found to be constant. In general
though, there will be a reasonable number of constant known plaintext
bytes.
ANALYSIS
The encryption algorithm was found to be the same as that used in the
4.2 version [2]. The main differences between version 4.2 and 5.0 are
in the file formats.
Bytes 0 - 15 of the original and encrypted files contain some useful
information. The offset address in bytes 4-5 gives the starting point
of the document text. The checksum of the key in the encrypted file is
in bytes 12 - 13. This gives the key directly if the key is a single
character.
The encryption of the file starts at byte number 16, so all the printer
information as well as the document is encrypted.
The Encryption Algorithm
* Firstly, the ciphertext is XORed with an ascending sequence of
bytes based on the sequence in Hexadecimal :
02 03 04 ... 79 7A 7B ... FD FE FF 00 01 02 03 ...
Note that the sequence repeats from 00 not 02 after reaching FF. The
keylength determines the starting point of the sequence to be used, ie.
starting point = keylength + 1
For example, for key = QWERTY the starting point of the ascending
sequence would be at position 6 in the sequence giving a starting value
of 07.
* Secondly, the resulting text is XORed with the key characters in
blocks of key length, to restore the original plaintext. This type of
polyalphabetic substitution is called a Vigenere cipher. The analysis
of Vigenere ciphers is well known and covered in the standard
cryptography literature e.g. [3,4,5].
Plan of attack
In the 4.2 version, the only text encrypted was that contained in the
actual document. This is unknown plaintext. In version 5.0, however,
the printer information as well as the document text is encrypted. We
have identified bytes 16 - 21, 24 - 27, 29 - 41, 43 - 45 as being
constant for a particular system (as defined earlier, a particular
licenced copy of WordPerfect on a particular PC and printer), and they
do not change markedly from one system to another.
So we have the ideal situation of known plaintext for a reasonable
number of bytes. This can greatly simplify our attack as it makes it
possible to recover the actual key. Then it is trivial to recover the
plaintext by using WordPerfect to retrieve the file using the
recovered key as the ''password''. Alternatively, a program could be
written to do this as the encryption/decryption algorithm is known. We
outline a strategy with the following example from one particular
system:
Document text consists of three lines of ten ASCII zeros each. The
size of the original file and the encrypted file is 651 bytes.
0000000000
0000000000
0000000000
Plaintext file contains in hexadecimal (for a particular printer):
BYTES 0-15 FF 57 50 43 6B 02 00 00-01 0A 00 00 00 00 00 00
16-31 FB FF 05 00 32 00 2D 02-00 00 07 00 11 00 00 00
32-47 42 00 00 00 02 00 56 00-00 00 53 00 00 00 0C 00
. ........
.
619-623 30 30 30 30 30
624-639 30 30 30 30 30 0A 30 30-30 30 30 30 30 30 30 30
640-650 0A 30 30 30 30 30 30 30-30 30 30
Ciphertext file contains in hexadecimal:
BYTES 0-15 FF 57 50 43 6B 02 00 00-01 0A 00 00 6E 50 00 00
16-31 B0 B4 42 41 7E 47 6C 46-53 53 58 59 45 5F 59 4C
32-47 19 5B 57 51 5E 57 07 74-63 63 3C 69 64 6F 65 7C
. .......
.
619-623 19 14 1F 19 0C
624-639 1B 1B 17 11 1C 2D 11 14-03 03 0F 09 04 0F 09 1C
640-650 31 0B 07 01 0C 07 01 E4-F3 F3 FF
We will illustrate a known ciphertext only attack, even though we
obviously know the exact plaintext in this particular example. So we
assume that we have a ciphertext file produced on some other hardware
system using a different licenced copy of WordPerfect. As explained
earlier, we can be confident that a substantial portion of text is
common to all systems. Thus to summarise, the known plaintext we have
is
BYTES 16 - 21 known
BYTES 22 - 31 known except for 22, 23, 28
BYTES 31 - 39 known
BYTES 40 - 47 known except for 42, 46, 47
* Firstly, look at bytes in positions 12 - 15 in the ciphertext file
above which contain the checksum of the key. If the key is one
character, it will be evident in byte number 12. For longer keys bytes
12 and 13 are probably non zero. In this example the checksum is 6E 50
which implies a key size greater then 1.
* Now we consider bytes 16 - 47. For byte number 16, we will try to
deduce the key character used. To do this, choose a keylength starting
with likely values say, 4 to 10 characters. Then XOR the plaintext
characters with the ascending sequence (in the algorithm section)
starting with position keylength which has the value keylength + 1.
Then XOR that result with the associated ciphertext and the key
character should result. For example,
keylength of 4 keylength of 8
plaintext FB 1111 1011 FB 1111 1011
sequence 05 0000 0101 09 0000 1001
xor --------- ---------
1111 1110 1111 0010
cipher B0 1011 0000 B0 1011 0000
xor --------- ---------
0100 1110 0100 0010
=> key 4 E 4 2
Thus we get the following table:
keylength starting possible
sequence key character
4 05 4E
5 06 4D
6 07 4C
7 08 43
8 09 42
9 0A 41
10 0B 40
* Now for a keylength of 4, byte 16 gives a possible key character
of 4E. Bytes 20, 24, 28 ... must also have been created from the same
key character, so we deduce a potential key character for these other
bytes to see if it is also 4E. It turns out that the other potential
key characters are not 4E.
* So we take the next possible key length, 5. Deduce the key
character for bytes 21, 26 .. to see if they match the value for byte
number 16 for that keylength, which is 4D. They do not.
* When a match is obtained for the first key character, deduce the
key characters for the remaining positions. We show the full analysis
for bytes 16 - 31 for a keylength of 8. As we stated earlier, bytes at
positions 22, 23 and 28 are unknown, and we signify these as ??.
BYTES 16 - 23
plaintext FB FF 05 00 32 00 ?? ??
sequence 09 0A 0B 0C 0D 0E 0F 10
xor ------------------------------
F2 F5 0E 0C 3F 0C ?? ??
cipher B0 B4 42 41 7E 47 6C 46
xor ------------------------------
=> key 42 41 4C 4D 41 49 ?? ??
BYTES 24 - 31
plaintext 00 00 07 00 ?? 00 00 00
sequence 11 12 13 14 15 16 17 18
xor ------------------------------
11 12 14 14 ?? 16 17 18
cipher 53 53 58 59 45 5F 59 4C
xor -------------------------------
=> key 42 41 4C 4D ?? 49 4E 54
* The repeating sequence for the key is obvious, even with three
unknown bytes at positions 22, 23 and 28, and so the key characters
are:
42 41 4C 4D 41 49 4E 54
B A L M A I N T
* Further checks on the key could be done using the known bytes from
32-47, if the repeating pattern of the key characters is ambiguous.
* In general, the probability of deducing the key bytes is dependent
on the keylength. Some definitions relating to the key byte are
useful:
* Known: the key byte may be determined at two or more
different positions which correspond to known plaintext.
* Possible: the key byte may be determined at only one position.
* Unknown: the key byte may not be determined as there is no
overlap of this byte with known plaintext.
In summary, for a keylength of 1-9, the key bytes are all known and
thus all of the key may always be deduced. For a keylength of 10-13,
15-17, there is a small proportion of possible to known key bytes. Thus
all the key may be deduced with a high probability. Keys with
keylengths of 14, 18-24 contain one, two or three unknown key bytes and
an increasingly high proportion of possible to known key bytes. At
least five bytes of the key may always be determined.
* Retrieve the plaintext using WordPerfect with the
key as the password. This is the easiest way to decrypt
the document text.
* If no access to WordPerfect is available, then it is
straightforward to recover the plaintext with a short C
program which implements the decryption algorithm as described
previously. This has been done successfully.
CONCLUSION
The encryption key is easily recovered in an apparent KNOWN CIPHERTEXT
ONLY attack, as the system provides enough known plaintext in the
printer information regardless of the document plaintext. The
analysis, as shown, can literally be done on the back of a (large)
envelope.
The analysis may be slightly more difficult where the physical system
on which the files were prepared is completely unknown and vastly
different to any system we have encountered, as this may reduce the
amount of known plaintext. In these situations, statistical analysis
based on the characteristic frequencies of characters in a language is
used to decipher text files. This is a standard method which is
straightforward although a program may have to be written.
In summary, the cryptanalysis of files encrypted with the 'locked
document' option in WordPerfect version 5.0 is remarkably simple. The
inclusion of portions of known plaintext in the encrypted file is a
fatal flaw in the system, since it provides a mechanism of attack in
which the key can be recovered by hand, and document plaintext easily
retrieved. All of the key can easily be recovered for keylengths of
1-13 and 15-17, far in excess of commonly used passwords of 8
characters. A high proportion of the key can be deduced for keylengths
of 14 and 18-24. The cipher used is too weak, providing little or no
protection.
If the attacker has knowledge of any other unencrypted file from the
same system, the analysis is made even more simple. We stress that
**both the key and the plaintext can be recovered**, independent of
the content of the plaintext.
The worst problem is that it may give a false sense of security. For
example, an attacker may decrypt a document, modify it and re-encrypt
so that the originator is unaware of the alterations. We conclude that
the file security is not consistent with claims made by the
manufacturer and is not sufficent to protect sensitive documents from
anything but the most naive attack.
References
1. WORDPERFECT CORPORATION (1989): WordPerfect for IBM Personal
Computers.\\
2. BENNETT, J (1987): Analysis of the encryption algorithm
used in the WordPerfect Word Processing Program,
Cryptologia, Vol XI. No 4. pp 206-210.\\
3. KONHEIM, A G (1981): {\em Cryptography, A Primer}, Wiley.\\
4. DENNING, D E (1981): {\em Cryptography and Data Security},
Addison Wesley.\\
5. CARROLL, J and Robbins, L E (1989): Computer Cryptanalysis
of Product Ciphers, Cryptologia, Vol XIII. No 4. pp 303-326.\\
Biographical
Helen Bergen is a Lecturer in the School of Computing Science, Faculty
of Information Technology, at the Queensland University of Technology.
Her research interests within the Information Security Research Centre,
Faculty of Information Technology, include cryptology and the
application of supercomputers.
Bill Caelli is Director of the Information Security Research Centre
within the Faculty of Information Technology at the Queensland
University of Technology. He is also Technical Director and Founder of
ERACOM Pty. Ltd., a manufacturer of cryptographic equipment. His
research interests lie in the development and application of
cryptographic systems to enhance security, control and management of
computer and data network systems.
--
John Gilmore {sun,pacbell,uunet,pyramid}!hoptoad!gnu gnu@toad.com
The Gutenberg Bible is printed on hemp (marijuana) paper. So was the July 2,
1776 draft of the Declaration of Independence. Why can't we grow it now?grantk@manta.NOSC.MIL (Kelly J. Grant) (08/29/90)
[...lots of interesting crypto stuff deleted...] I disagree that WP documents are "trivial" to decode. They are possibly trivial for the 'sci.crypt' people who have experience in breaking ciphers and the like, but for people who have no training or knowledge in the subject, I think WP locked documents are perfectly safe for reports or other "private" (but not classified) documents. Of course, now that you have posted a cookbook approach to breaking these documents, they are a little less secure. I certainly wouldn't have taken the time to try to figure out the encryption before (I probably still won't). In reality, we all know truly sensitive data should be locked by a "world class" encryption scheme, and then placed in a secure place. But what ciphers can't be broken ? In the larger sense, what is a secure place? What man can build, man can destroy. The WP protection scheme keeps honest people honest, like car door locks. The hackers of this world are greatly outnumbered by people who either could not or would not attempt to break into a document that wasn't thiers in the first place. Actually, I'm glad this was posted. This way, when someone comes into my office wailing about a WP document for which they have fogotten the password I will be able to help. Kelly DISCLAIMER: My opinions are mine. CSC can't have them. -- Kelly Grant grantk@manta.nosc.mil (619) 225-8401 Computer Sciences Corp ^^^^^^^^ Important: manta.UUCP won't get to me 4045 Hancock Street "If you are given lemons.....see if you can trade for San Diego, CA 92110 chocolate" - me
cme@lectroid.sw.stratus.com (Carl Ellison) (08/29/90)
In article <1190@manta.NOSC.MIL> grantk@manta.nosc.mil.UUCP (Kelly J. Grant) writes: >I disagree that WP documents are "trivial" to decode. They are possibly >trivial for the 'sci.crypt' people who have experience in breaking >ciphers and the like, but for people who have no training or knowledge >in the subject, I think WP locked documents are perfectly safe for >reports or other "private" (but not classified) documents. [ more of the same deleted ] Kelly, I can't speak for the original posters, but I was offended by WP's false claim. I don't care about the security of the encryption mechanism. My mother has a china cabinet with an ornamental latch -- pretty and useless -- but the manufacturer didn't claim it was as good as a steel safe. WP made that bogus a claim -- and that was the unforgivable sin.
jkp@cs.HUT.FI (Jyrki Kuoppala) (08/29/90)
[ followups to alt.security and comp.os.msdos.apps ] In article <1190@manta.NOSC.MIL>, grantk@manta (Kelly J. Grant) writes: >I disagree that WP documents are "trivial" to decode. They are possibly >trivial for the 'sci.crypt' people who have experience in breaking >ciphers and the like, but for people who have no training or knowledge >in the subject, I think WP locked documents are perfectly safe for >reports or other "private" (but not classified) documents. Well, I wouldn't say they're safe for anybody. Because 'unlocking' the documents in case of a forgotten password is useful, someone will probably soon write a program to 'unlock' the documents and release it to free distribution like comp.sources.misc. I probably would do it, if I used WP. This is true for lots of other things in computer security, too. For example, Bridge (well, I don't know who owns the company manufacturing these beasts this week ;-) terminal servers and MAC-level bridges accept configuration commands to a magic UDP port and no access control is used. Well, the bridges themselves ask a password to enter the configuration mode (local or global netmanager) but the 'global' netmanager is implemented by just sending UDP packets to a magic port and the only difference betwen local and global netmanager is that a local manager can't send UDP commands from the bridge to other Bridge equipment (oh yes, another difference is that the global netmanager password isn't shown to local manager). But normal Unix machines don't have the 'control', so they can issue 'global netmanager'-level commands and the Bridges are even so friendly that they tell you all the passwords. This 'access control' kind of resembles the story of the beast which thinks it can't see anybody else if the someone else's eyes are covered in the Hitchiker's Guide to the Galaxy, makes you wonder if the HGG was used as a design document ;-) Similar things appear on many Sun workstations; people may think that it's good enough protection because not many people know about the vulnerabilities and those in the know should not tell others. However, if the problems are not discussed and solved, we are in deep trouble; often the documents don't point out the vulnerabilities (probably because of commercial reasons - it wouldn't look quite good if Bridge put in it's documentation something like "By the way, this 'access control' mechanism isn't designed to really work, it's just there so we wouldn't get a bad reputation for not providing access controls.") Just as for the WP someone will probably write (and probably many have already written) a program to open 'locked' documents, I have written some software for Bridge administration (in addition to sending those UDP packets, it can read files from a Bridge NCS/AT and function as a NCS/AT file server) because the software is useful. I am planning to announce that the software is available for anonymous ftp when I have it somewhat cleaned up. I don't know if the access control problems have been fixed in current software releases; they were there two years ago and the local represantative was informed, so they might be fixed, but I would't be so confident. People using Bridge equipment might ask their vendor if the problem still exists. >Of course, >now that you have posted a cookbook approach to breaking these documents, >they are a little less secure. And then again, maybe a lot more secure since the problem is now widely known and the vendor probably will change the documentation to tell that the protection is not 'a real thing' and users wanting real privacy will have to use alternative methods. >In reality, we all know truly sensitive data should be locked by a >"world class" encryption scheme, and then placed in a secure place. >But what ciphers can't be broken ? In the larger sense, what is a >The WP protection >scheme keeps honest people honest, like car door locks. Yes, this is a point; in my opinion, however, the WP protection did a lot more harm than good since it was documented to be quite safe when it was not. The users were fooled into thinking that their car was locked when it fact it was not. //Jyrki
s30986u@kaira.hut.fi (Martin Helin) (08/29/90)
jkp@cs.HUT.FI (Jyrki Kuoppala) writes: >Well, I wouldn't say they're safe for anybody. Because 'unlocking' >the documents in case of a forgotten password is useful, someone will >probably soon write a program to 'unlock' the documents AT LEAST one company (in Utah, USA) markets a program that will recover crypted Word Perfect documents. The company has similar products for other programs (e.g. Lotus, MS Ecxel) too. And like Jyrki said it probably won't take long until somebody releases a PD program to do the same. Martin Martin Helin Helsinki University of Technology, Finland Internet : mhe@otax.tky.hut.fi s30986u@kaira.hut.fi UUCP : uunet!kaira.hut.fi!s30986u
nfs@cs.Princeton.EDU (Norbert Schlenker) (08/30/90)
In article <12163@hoptoad.uucp> gnu@hoptoad.uucp (John Gilmore) writes: >One thing that came up at Crypto '90 was a short paper from Ms. Helen >Bergen at Queensland U. in Australia. She noticed the 'locked >document' commands in Word Perfect, used by all the secretaries in her >dept., and looked to see how strong it was... > >Quote from letter received from WordPerfect Pacific: > >They confirmed that people have written programs to break the password. >However, WordPerfect Corporation does not have such a program and >therefore has no way of breaking it. They also pointed out that very >few users would know how to write such a program. They won't need to write it, will they? After all, very few users would know how to write WordPerfect. They just buy it shrinkwrapped. >It is possible that the manual may be amended in a future edition to >clarify the protection that a password gives. They recommend that >anyone concerned about security may want to take higher precautions >than the password protection. Oh, jolly good! After all, there is "absolutely no way to retrieve the document" according to the WP manual. I have a friend who works on a contract basis for a large Wall Street law firm supporting WP on a LAN. He's very interested in the program that I cobbled up in two hours from the Bergen/Caelli paper. I plan to share in the profits :-) And now to the paper itself: > FILE SECURITY IN WORDPERFECT 5.0 > > H.A. Bergen School of Computing Science > W.J. Caelli Information Security Research Centre >... > * BYTES 22 - 31. Of these 10 bytes, 22, 23, 28 are file and system >dependent, but bytes 24, 26, 29, 30, 31 are constant with value 00. Hmmm. What about bytes 25 and 27? Also, I should report that my version of WP 5.0 has a nonzero byte in byte 26. > * BYTES 32 - 39 were constant for files prepared on the three >different systems and contained > > 42 00 00 00 02 00 56 00 My WP 5.0 has different values (usually FF FF instead of 02 00) in bytes 36 and 37. <remainder of excellent file description and encoding algorithm elided> All in all, a fine article. I probably shouldn't offer, but anyone who wants my ugly C hack for a decoder, including atrocious interactive dialogue to resolve ambiguities in the key via human guessing, should send me email. Norbert
ferry@chorus.fr (Ferry de Jong) (08/30/90)
> I'm not going to quote the discussion because I didn't follow it > completely. My opinion on WP locked files is that they are easy to break. I friend of mine needed only two days of programming to write a utility that gave the password of any locked WP file. (Reading that file and building certain frequencytables.) So everybody who gets a copy of this c-source and knows how to use a c-compiler can read ALL documents written in WP. (Only restrictions: the length of the password has to be at least 1/5 of the document text. WP V4.1 and WP5.?) ATTENTION: I don't have the source. So don't ask me for a copy! Anyway if I had it I wouldn't give it because I might use WP one day myself... Oops: Only posted it in alt.security last time. (Sorry, I don't post news often so I do something wrong sometimes...) ___ ___ ___ ___ _ _ _ _ ( _)( _)( ,) ( ,)( \/ ) | ( \/\/ )riting software takes twice as long ) _) ) _) ) \ ) \ \ / | \ / as you expect it to take... (_) (___)(_)\_)(_)\_)(_/ | \/\/ Even if you keep this in mind! e-mail: ferry@chorus.fr
toma@tekgvs.LABS.TEK.COM (Tom Almy) (08/30/90)
Oh, great! All those WP files that I encripted thinking they were safe (even WPCorp said *they* coundn't decrypt them) are now easiy read by anybody, especially when the decryption programs start appearing in the marketplace. Now I'll just have to use a separate program to do the encrypting. BTW, there has always been a problem when editing encrypted files with the timed-backup option turned on. The backup files are not encrypted. The fact that the file is deleted when WP exits normally doesn't matter because there are plenty of unerase programs around. Tom Almy toma@tekgvs.labs.tek.com Standard Disclaimers Apply
ferry@chorus.fr (Ferry de Jong) (08/31/90)
From article <6125@chorus.fr>, by ferry@chorus.fr (Ferry de Jong): > (Only restrictions: the length of the > password has to be at least 1/5 of the document text. WP V4.1 and WP5.?) ^^^^^ Sorry little mistake. The restriction is that the password has to be SMALLER then 20% of the text. If it is longer the program can't guarantee for a 100% the password is correct. But after all in most cases it still produces the correct password. ___ ___ ___ ___ _ _ _ _ ( _)( _)( ,) ( ,)( \/ ) | ( \/\/ )riting software takes twice as long ) _) ) _) ) \ ) \ \ / | \ / as you expect it to take... (_) (___)(_)\_)(_)\_)(_/ | \/\/ Even if you keep this in mind! e-mail: ferry@chorus.fr
ferry@chorus.fr (Ferry de Jong) (09/03/90)
From article <8029@tekgvs.LABS.TEK.COM>, by toma@tekgvs.LABS.TEK.COM (Tom Almy): > > BTW, there has always been a problem when editing encrypted files with > the timed-backup option turned on. The backup files are not encrypted. > The fact that the file is deleted when WP exits normally doesn't matter > because there are plenty of unerase programs around. > > Tom Almy > toma@tekgvs.labs.tek.com > Standard Disclaimers Apply And not to forget all the CUT/COPY/PASTE buffers. Wide open for everybody. Even if it is an encrypted file. OK, they are removed after the F7 exit function but didn't you know there are tools like 'undelete' and 'N*RT*N'. Question and important note to amiga WP users: Did you know that if you use the timed-backup function of WP V4.1 on the AMIGA and your (floppy/hard)disk is almost full WP will crash the complete filesystem beyond repair. (No disksalv or diskdoctor, forget it...) Who knows to solve this problem. (Without having to turn auto-backup off. ;-) ) ___ ___ ___ ___ _ _ _ _ ( _)( _)( ,) ( ,)( \/ ) | ( \/\/ )riting software takes twice as long ) _) ) _) ) \ ) \ \ / | \ / as you expect it to take... (_) (___)(_)\_)(_)\_)(_/ | \/\/ Even if you keep this in mind! e-mail: ferry@chorus.fr
ee5391aa@hydra.unm.edu (Duke McMullan n5gax) (09/10/90)
In article <1990Aug29.122029.24884@santra.uucp> s30986u@kaira.hut.fi (Martin Helin) writes: >AT LEAST one company (in Utah, USA) markets a program that will recover >crypted Word Perfect documents. The company has similar products for >other programs (e.g. Lotus, MS Ecxel) too. >And like Jyrki said it probably won't take long until >somebody releases a PD program to do the same. One was posted on sci.crypt last week. ;^) d -- "...while I know many people who emphatically believe in reincarnation, I have never met or read one who could satisfactorily explain population growth." -- Spider Robinson Duke McMullan n5gax nss13429r phon505-255-4642 ee5391aa@hydra.unm.edu