jp@sbsvax.cs.uni-sb.de (Joachim Philippi) (09/14/90)
Problem:
When himem.sys is loaded I get mess on the screen in windows:
first the screen looks ok, but when I move the mouse or
open and close some windows, there appear some "dirty lines"
on the screen.
I tried various values for
emmexclude=paragraph-paragraph
in SYSTEM.INI (e.g. c400-c7ff as recommended in readme.txt
"Using VGA Display Adapters") but without success.
Without himem.sys, windows runs without any problem
- but in real mode :-(
Configuration:
Mainboard PEM-2500 Cache-386 25MHz (Datatech Enterprises)
Video Adapter Optima 1024 (VGA 16 Bit 512KB, Tseng Chips)
MS-DOS 3.3
Phoenix 80386 Rom Bios Plus Version 1.10.01
AUTOEXEC.BAT as created by Windows Setup
CONFIG.SYS as created by Windows Setup
himem.sys version 2.60, 04/05/90, A20 handler number 1
Any ideas?
Thanks for your help
Joachim
email : philippi@cs.uni-sb.de
or : philippi@sbsvax.informatik.uni-saarland.dbp.de
or : ...!uunet!unido!sbsvax!philippi
voice : +49 681 302 2065
snail : Joachim Philippi, Universitaet des Saarlandes
FB 14 - Informatik, Gebaeude 36, Raum 227, Im Stadtwald 15
D-6600 Saarbruecken 11, West Germany
--
email : philippi@cs.uni-sb.de
or : philippi@sbsvax.informatik.uni-saarland.dbp.de
or : ...!uunet!unido!sbsvax!philippi
voice : +49 681 302 2065
snail : Joachim Philippi, Universitaet des Saarlandes
FB 14 - Informatik, Gebaeude 36, Raum 227, Im Stadtwald 15
D-6600 Saarbruecken 11, West Germany