bagpiper@mcosm.uucp (06/30/90)
I just got a brand new 386 box that is going to be used for various things, as
I had a particulary thorney problem with a large program I am working on I
thought that I would give Borland's td386 2.0 a run. I get one of two
responses upon trying to load td386. Either the machine does a cold restart or
I get a message in yellow letters at the top of the screen about an unexpected
interrupt. I don't know a whole lot about the machine because it was put
together as a turn key system, but got the following information from the
startup messages.
TVGA BIOS C3-129 Ver 1.01
256K DRAM VGA Mode
386-BIOS from Americal Megatrends
EC&T-1197-030389-K8
I have 4Mb of RAM and an 80387. I took out all the drivers from my
config.sys until I got down to the Borland driver for td386. All that is
left is files, buffers, and a driver for td386. If anybody has any ideas
I would appreciate help.
Thankx,
Michael
--
-------------------------------------------------------------------------------
+ Michael Hunter {backbone}!hacgate!trwind!mcosm!bagpiper +
+ BIX:bagpiper +
+ NOTHING like a spacecraft with a bad attitude!!! +
-------------------------------------------------------------------------------