hoang@rex.cs.tulane.edu (Hoa`ng Tie^'n Du~ng) (07/24/90)
I have an EGA card and a VGA card that I have no documentation for and would like to know how to set the DIP switches and jumpers. The EGA card has a Genoa chipset with a BIOS chip labeled EXPERT SEGA BIOS v 2.41-3. There is a 6-position DIP switch and three jumpers: 2 with 3 pins (labeled JMP1 and JMP2) and one with 6 pins (labeled JMP3). There are also two RCA jacks--What are their functions? The closest thing to a model number on the board is LH6392. The VGA card has a Paradise chipset and is of the 8-bit variety. It is marked as made by WDC (Western Digital?). The Paradise chip is labeled PVGA1A 38331. There are a 3-pin jumper labeled W1 and a 4-position DIP switch. Any information that you may have about these cards would be greatly appreciated if you would share it with me. Thanks in advance, Dzung Hoang -- ----------------------------------------------------------------------------- hoang@comus.cs.tulane.edu hoang@rex.cs.tulane.edu hoang@comus.UUCP hoang@rex.UUCP tulane!comus!hoang tulane!rex!hoang -----------------------------------------------------------------------------