[comp.sys.ibm.pc.hardware] Adding a 3rd FDD

wdarden@nrtc.nrtc.northrop.com (Bill Darden <wdarden>) (07/31/90)

Hi all,

I have an AT with a WD1003-WA2 FD/HD Contoller and I am trying to
add a 1.44 MB as Drive D: by using a second FD Contoller that is
capable of secondary address, but....  The second controller and
1.44 FDD both test good when used as the primary.  I have used
/d:2 and /d:3 in driver.sys to no avail.

I would appreciate any suggestions or work arounds.

Thanks,

BiLL.....