dennett@usage.csd.unsw.oz.au (Dennett Jaques) (08/04/90)
G'day there,
I sent the following request to various OS/2 newsgroups but did not get
much response. Can anybody here help out?
***************************************************************************
I'm trying to configure OS/2 1.21 (Microsoft Version) on a 286. I dont get
very far at all though, because my machine hangs when I run the install disk.
I have a feeling that OS/2 can not recognise my hard disk.
I have a Mitsubishi 65Mbyte RLL drive with an Adaptec 2372B disk controller.
This controller has its own BIOS which is probably the root of the problem.
My question is - does anyone have an OS/2 driver for this controller?
I just read an article in one of the OS/2 news groups stating that Adaptec
had drivers available for their SCSI controllers and thought it was at least
worth asking.
****************************************************************************
By the way since then, I have found in the installation instructions that came
with the card that the controller works with OS/2. But I cant get it to.
Many thanks for any help .........
Cheers.
Dennett Jaques.
_________________________________________________________________
,-_|\ Network Analyst E-mail: dennett@usage.csd.unsw.edu.au
/ \ The University of N.S.W Phone: +61 2 697-2324
\_,-._* <- Sydney, AUSTRALIA FAX: +61 2 662-8665
v _________________________________________________________________
When I want my employers opinion,
I'll give it to them.