robin@uhccux.uhcc.Hawaii.Edu (Robin Amano) (10/21/90)
Does anyone out there have the jumper settings and switch settings for the AST-3G Plus? My father-in-law's friend upgraded to a vga monitor and gave him his old AST board, but lost the manual. He called the company and got the switch settings but it doesn't seem to work. Any help would be appreciated. He'd like to use it in CGA mode. Thanks!! ------------------------------------------------------- Robin Amano | Internet: robin@uhunix.uhcc.hawaii.edu UHCC | robin@uhccux.uhcc.hawaii.edu 2565 The Mall | Honolulu, HI 96822
huis@testeng1.misemi (Stephen Hui) (10/24/90)
Call to AST's BBS. It will tell you how to set the switches. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Stephen Hui uunet!mitel!testeng1!huis Mitel Corporation Tel: (613) 592-2122 X4959 Kanata, Ontario, CANADA Fax: (613) 592-4784
jc58+@andrew.cmu.edu (Johnny J. Chin) (10/25/90)
I don't have an AST 3G Plus (the original long card) but I do have an AST
3G Plus II card (the short one).
The settings for CGA are as follows (taken from a board sitting on my desk):
SW1: 1-on, 2-on, 3-on, 4-off, 5-on, 6-off
Jumper: there is only one on this board. 3xx + jumped across pins to 3xx
. +
2xx
I hope this helps.
__________ ___
/ \ / / /-/ / /\/
_/ / / / __/. /__ / / / / /
/ / / "Happy Computing ..."
/ / Internet: Johnny.J.Chin@andrew.cmu.edu
/ ------- / 4730 Centre Ave. #412 BITnet: jc58@andrew
\__________/ Pittsburgh, PA 15213 UUCP: ...!uunet!andrew.cmu.edu!jc58
Computer Dr.
______________________________________________________________________________
Disclaimer: The views expressed herein are STRICTLY my own, and not CMU's.