bobd@magnus.ircc.ohio-state.edu (Bob DeBula) (11/16/90)
I'm installing a Conner CP3184 IDE hard drive in an AST Bravo model 5. Unfortunately, the 84Mb Conner drive did not come with any drive geometry information (I need at a minimum to know the number of cylinders, number of heads, number of sectors, and precomp (if any)). I do not see the drive described in the 47 predefined types in ASTSETUP so I'll probably have to low level format it manually. If anyone has any information regarding the proper geometry for the CP3184 and/or any information on installing it in an AST Bravo, I would very much appreciate receiving any information you may be able to provide via e-mail. Thanks in advance. -- ========================================================================== Bob DeBula | Internet: bobd@hpuxa.ircc.ohio-state.edu The Ohio State University | Disclaimer: These are my views, not the U's Davros sez: When my Daleks compute they use X-TER-MI-NALS!