elliott@aero.org (Kenneth B. Elliott III) (12/07/90)
Well, the replies have stopped drifting in, so here's the results of the survey. For those who tuned in late, I asked what combinations of SCSI controller/peripheral/OS were out "there" and actually working. I received 12 replies, summarized below. Mucho thanks to all who replied. I hope that someone else finds this useful. I wound up getting an Adaptec 1542B "Master Kit" (basically, the adapter with drivers for DOS, OS/2, and Novell and a cable) and the el cheapo Seagate 296N. ========================== survey results =========================== Controller Peripheral OS Notes ---------- ---------- -- ----- Seagate ST02 Seagate ST296N and Priam ??? Adaptec 1522 Quantum ProDrive 170 Dos 4.01 4 months, QEMM 5.11 Mylex 33 MHz 386, SCSI-2 Adaptec AHA1542B CDC Wren III Windows 3.0 CDCWren IV Adaptec AHA1542B Quantum ProDrive 105S Windows 3.0 Adaptec AHA1542A Conner CP3200 SCO Unix 3.2.1 w/ Open Desktop 1.0, and PC-DOS 3.30 Adaptec AHA1542B Conner CP3200 Dos 4.01/ 2 months, Windows 3.0 Northgate 25 MHz 486 WD 7000 FAST II Micropolis 1674 Windows 3.0 8.5 months, 10 MHz 286 Adaptec AHA1542A Conner Cp3104 PCDOS 3.3 Adaptec AHA1542A Imprimis 766 MB PCDOS 3.3 DTC3280A CDC 94211-5 MS-DOS 3.3 25 MHz 386 WD7000ASC REV 3.31 CDC 94211-5 (2) QEMM, Desqview, > 1 year Windows 3.0 Fut. Dom. TMC-845 Toshiba TXM-3201A1 MS-DOS 3.20 CD-ROM drive, AT&T PC6300-PLUS, 2 months Seagate ST02 Seagate ST296N Adaptec 1540B Conner PM 2001/95 DOS, Windows 3.0, OS/2 SE v1.2 Always IN-2000 Fujitsu 750 MB DOS, Novel SFT 2.15c ======================================================================== KBEIII -- Ken Elliott elliott@aerospace.aero.org