gregg@rm1.UUCP (Gregg Zupcsics) (12/10/90)
I'm having some trouble adding an IDE disk (Segate 1144A drive,
Silicon Valley ADP 60 controller) to my AT clone and would appreciate
your help with some problems I've encountered. I have version 3.01 of
the AWARD BIOS.
1) This BIOS has several disk type entries with all parameters set
to zero. I'd like to use one of these entries (# 47) to define
my drive. Unfortunately, I bought the BIOS second hand, and don't
have the full doc. on it's operation. How can I fill in the
values for a given drive type?
2) Does anyone have the phone #, e-mail, or snail mail (street address)
for AWARD, or know where I can buy a current version of this (or
an equivalent) BIOS for a 12 MHz AT clone using Intel support chips
(as opposed to C&T etc.)?
Please respond via e-mail if possible.
thanks much,
Gregg
--
Gregg Zupcsics {ihnp4|allegra|codas}!novavax!utx1!gregg
Racal-Milgo, MS E1-12, PO Box 407044, Fort Lauderdale, Fl 33340, (305) 846-6332
--
Gregg Zupcsics
Racal-Milgo, Network Mgmt Product Development
1601 N. Harrison Parkway Phone: (305) 846-6332 (w/ voice-mail)
Sunrise, FL 33323-2899 USA UUCP : ...uflorida!novavax!rm1!gregg