andrem@pyrman2.pyramid.com (Andre Molyneux) (12/29/90)
I'm looking for information on the expansion slots inside of a Tandy 1000TX. I've already posted a request to "comp.sys.tandy" and have received a few hints on magazines to look at, but have yet to get the answers I'm looking for. Basically, I'm trying to find out if the slots in this puppy are standard slots or Tandy-specific slots. If they are standard, are they 8-bit or 16-bit slots (the machine is running off of a 286 but I was once told that due to its design it is only an XT clone). I'm hoping to be able to plug in a third-party hard disk controller and to upgrade the graphics (the built-in adapter is CGA). If you can shed any light on this subject (neither the manual nor the local Radio Shack has been any help whatsoever) please e-mail me as I don't regularly subscribe to this newsgroup. Thanks in advance +---------------------------------------------------+--------------------------+ | Andre Molyneux andrem@pyrman2.pyramid.com |*** GENERIC DISCLAIMER ***| +---------------------------------------------------+--------------------------+ | -=-------- PYRAMID TECHNOLOGY CORPORATION |All the usual disclaimers | | ---===------ 1295 Charleston Road |apply although, as far as | | -----=====---- Mountain View, California 94043 |I can tell, my employer | |-------=======-- (415) 965-7200 |doesn't care what I think!| +---------------------------------------------------+--------------------------+