hca@pnet51.orb.mn.org (H. Atlas) (01/10/91)
The hardware setup is what tells the computer what drives are installed,
how the memory is setup and wait state information.
You should check your user manual or motherboard manual.
Usually you can press a key while the memory check is going on to
go into the setup mode.
You can try F1 or ESC to see if they may work.
Howard Atlas
UUCP: {amdahl!bungia, crash}!orbit!pnet51!hca
ARPA: crash!orbit!pnet51!hca@nosc.mil
INET: hca@pnet51.orb.mn.org