MADIF@ROHVM1.BITNET (Jim Foster) (01/14/91)
In article <307@stiatl.UUCP>, iam@stiatl.UUCP (Ian Mercado) says: > >Anybody care to offer any suggestions as to why running QEMM 5.1 and >Windows 3.0 in 386 enhanced mode would trash my hard drive? > >The scenario... > >An ALR Business VEISA 386/33Mhz >A SigmaVGA Legend SVGA board >A 3-Com Ethernet board >An Adaptec SCSI hd controller. > >This setup trashed both mine and a co-worker's hard drives when we tried >to load up windows in 386 enhanced mode. The QEMM line in CONFIG.SYS was: > >device = c:\qemm\qemm386.sys /db:16 RAM ROM NOSORT > Try adding the NOVDS parameter. This is necessary for dealing with the SCSI controller. -- Jim Foster - MADIF@ROHVM1.BITNET DoD #142 Rohm and Haas Company Systems Programmer 1984 NightHawk-S Independence Mall West (215) 592-2446, 592-3377 (FAX) 1987 Ninja 250 Philadelphia, PA 19105