gtoye@supernet.dallas.haus.com (Gene Toye) (02/03/91)
I am trying to helpmy father with a problem on his system. He has a 4 drive floppy controller (some clone brand) and a seperate hard disk controller (WD 1003). He recently upgraded to a 286 motherboard with an AMI BIOS and can't seem to determine how to configure the system to have more than two floppy drives. He has set the AMI setup for the first two drives and they work fine. The third floppy drive is not accesable. Has anyone tried this setup and made it work? If so, how. One idea that comes to mind is to tell AMI that no floppy drives are installed. Would this allow the BIOS on the floppy controller to then access all installed drives? Thanks for any insight on this problem! Gene Toye -- Gene Toye: Harris Adacom Corporation / 16001 Dallas Pkwy. / Dallas, TX 75248 Internet: gtoye@supernet.haus.com or gtoye@supernet.lonestar.org Usenet: uunet!{iex,ntvax}!supernet!gtoye DISCLAIMER: My employer never knows what I am going to say next.