jin@spdcc.COM (Jerry Natowitz) (02/22/91)
I thought I'd pass along a goodie that I got from Gateway 2000 Tech support
(and it only took 15 minutes to get through :-)
To configure the Diamond Speedstar to drive the Crystal Scan 1024NI select
"custom" as monitor type.
Then for 640X480 select line 1: 31.5 kHz, 60 Hz, and set H/V polarity -/-
800X600 line 4: 48.1 72 -/+
1024X768 line 3: 48.9 60 +/+
After each option you will have the opportunity to center the display.
When finished the setting will be stored so will only need to add
VMODE CUSTOM to your autoexec.bat
--
Jerry Natowitz
Guest user on:
ARPA jin@ursa-major.spdcc.com
UUCP {ima,harvard,rayssd,linus,m2c}!spdcc!jin