vanmick@hpsgm2.sgp.hp.com (Van Der Beek Michael-Leo) (03/20/91)
Hello all, I need help with my Syquest Removeable HD (44Mb). After, I installed the ST01 SCSI card into a slot and connected the power cables to the Syquest, I also put device=syq55.sys into the config.sys file. When I turned on my computer, I gave and error like Syquest not found: No partion made in DOS. I have a 386-33Mhz and 4Meg ram and AMI bios. I have a Maxtor 80Meg HD (19ms). I hope someone can give me some information on this. Is it possible there is a conflict of cards or that the ST01 cannot work on a fast clock speed. I hope it is not that the card has been killed by some surge of static during installation. Please reply soon. Thanks in advance. Michael