martin@saturn.uucp (Martin J. Schedlbauer) (04/03/91)
I have QEMM 5.1 under DOS 4.01 and Windows 3.0 on a 386 with 16MB. I'm loading PCKWIK (Windows version) into low memoryand nothing into high. I excluded virtually all the High RAM, as I have a 8514/A, VGA, ESDI. If I print in Windows using SuperPrint, the file inside AMI get trashed and SuperPrint's print spool file is also corrupted. If I don't use QEMM, but rather HIMEM, everything is fine. Are there any special options I should use? anybody care to share theirs? thanks, ...Martin -- ============================================================================== Martin J. Schedlbauer | martin@saturn.UUCP | ...!ulowell!saturn!martin 8 Gilman Road | mschedlb@ulowell.edu | ...!uunet!wang!saturn!martin Billerica, MA 01862 USA | CIS: 76675, 3364 | Voice/Fax: (508) 670-2169
mlord@bwdls58.bnr.ca (Mark Lord) (04/08/91)
In article <1991Apr3.141954.255@saturn.uucp> martin@saturn.uucp (Martin J. Schedlbauer) writes:
<I have QEMM 5.1 under DOS 4.01 and Windows 3.0 on a 386 with 16MB.
But *which* version of QEMM 5.1 ????
The choices are: 5.10, 5.11, or 5.12. Only the second two are compatible
with Windows 3.0.stevek@unknown.HP.COM (Steve Kauder) (04/11/91)
I understand you should upgrade QEMM from 5.1 to 5.11 (now 5.12). 5.11 and greater work with windows. sk
doug@hparc0.HP.COM (Doug Parsons) (04/12/91)
Can anybody post the binary patch that converts QEMM 5.11 to 5.12? My last attempt at getting an update took 3 months through the US post (a card board floppy container was sent from Rockville, MD postmarked Dec 12,90. I received it 10 days ago. The stamp was 63 cents.) Thanx in advance douginoz australia...