rkod5@fel.tno.nl (R. Koolma) (04/26/91)
Lately our group has bought two HP Vectra QS/20 PC. These models were delivered with an HP Super VGA board (HP D2382A). With this board you can use standard VGA software, but I would like to use the other feathers of this board. I have a Turbo Pascal BGI driver for the 640*400*256 mode. I know there are more things you can do with this card but I don't know how. I am very interested in the 720*540*16 mode which I could use for drawing. If there is somebody who knows more about this card and how to program it, please reply or send me a message by E-Mail. My E-Mail address is rolf.koolma@fel.tno.nl
dlow@pollux.svale.hp.com (Danny Low) (05/03/91)
>Lately our group has bought two HP Vectra QS/20 PC. These models were >delivered with an HP Super VGA board (HP D2382A). With this board you can >use standard VGA software, but I would like to use the other feathers of >this board. I have a Turbo Pascal BGI driver for the 640*400*256 mode. >I know there are more things you can do with this card but I don't know how. >I am very interested in the 720*540*16 mode which I could use for drawing. It's a Video 7 1024i card. Order the TRM for that card from Headland. Danny Low "Question Authority and the Authorities will question You" Valley of Hearts Delight, Silicon Valley HP NPCD dlow@pollux.svale.hp.com
pfeifer@hpavla.avo.hp.com (Mark Pfeifer) (05/04/91)
/ hpavla:comp.sys.ibm.pc.hardware / rkod5@fel.tno.nl (R. Koolma) / 7:05 am Apr 26, 1991 / This is not an offical HP reponse. Any driver for the Video-7 1024i card will work with the HP SuperVGA card. Mark Pfeifer