[comp.sys.ibm.pc.hardware] The Real-Time Clock

lopes@cogsci.ucsd.EDU (alann lopes) (05/23/91)

   Can someone tell me how to set the interrupt frequency
   on the Motorola MC146818 to something other than the
   default 1024 Hz. Status register A: Bits 3-0 are apparently
   used but what value do I put in, if I want an interrupt
   frequency of say 22 KHz, or 11 KHz, etc.

   Thanks for your help -- alann



--------------------------------------------------------
   alann lopes:        alopes@ucsd.edu       -- internet
   Programmer/Analyst  lopes@cogsci.ucsd.edu -- internet
   (619) 534-7417      ALOPES@UCSD           -- bitnet
                       ...!ucsd!alopes       -- uucp
--------------------------------------------------------