jka@mris.larc.nasa.gov (J. Keith Alston) (06/10/91)
Hello, My system consists of a 386/25 with a WD1006V-SR2 RLL disk controller and a 65 Mbyte mitsubishi MR-535 drive. I've just purchased another 65 Mbyte drive, miniscribe 3675. I disconnected the mitsubishi drive and connected up the miniscribe, and was able to format it and bring it up ok. What I want to do is puT The mitsubishi back as the C: (primary) drive and add the miniscribe as the D: drive since my controller can handle 2 HD's. What I need to know is are there any jumper settings that I should know about on either drive, or the contoller? also how should the setup be terminated or do I not need to worry about this? Any help would be greatly appreciated, Keith Alston jka@snow.larc.nasa.goV