rdcarney@rhutch.UUCP (Randolph Carney) (06/11/91)
Recently I picked up a VGA card at a hamfest CHEAP. After installing the full 512K of memory, this card works perfectly up to 640x480 resolution; however, it won't do 800x600 using CSHOW or VGIF, which is what I was using to test the card. There are six DIP switches, but the card functions exactly the same no matter where the switches are set. Of course, I don't have any device drivers for this card. Details: 16-bit, 512K, using Trident TVGA-8800CS chip set. PC board says "ONBOARD TECHNOLOGIES ZVGA-16"; also there is a sticker over the top edge card connector that says "HEDAKA SUPER VGA". I can use this card as it is, but I'd like to be able to exploit its capabilities if possible. Any information at all greatly appreciated, especially a phone number where I could contact the manufacturer. -- UUCP: rutgers!devon!rhutch!rdcarney (Randolph Carney) INTERNET: rhutch!rdcarney@devon.lns.pa.us Rabbit Hutch BBS -- +1 717 354 5027