Michael Squires <mikes@iuvax.cs.indiana.edu> (06/24/91)
I have been working with a 386SX using the AMI BIOS and NEAT chipset made by MCT and sold by JDR. When trying to boot from a WD1007A ESDI HD controller it will often (1) display garbage (2) start boot, crash during memory checking (3) boot, in about that order of probability. After booting it seems to run fine under SCO UNIX or Novell Netware 2.15C as a dedicated server. The WD1007 and had drive were last used about six months ago and were working flawlessly at that time. Removing the board causes the machine to start self-test every time without problems. Any ideas? -- Mike Squires (mikes@iuvax.cs.indiana.edu) 812 855 3974 (w) 812 333 6564 (h) mikes@iuvax.cs.indiana.edu 546 N Park Ridge Rd., Bloomington, IN 47408 Under construction: mikes@sir-alan.cica.indiana.edu