ti@altos86.Altos.COM (Ti Kan) (10/02/90)
I have a large hard disk (190MB) which is now partitioned into logical drives c: through h: with MS-DOS 3.30. I would like to be able to access the drives d: through h: while on c: via directory paths. For example, "cd c:\d" brings me to d:\, and "type c:\d\file" will actually display d:\file. This is exactly the converse of what the DOS "subst" command allows. Is there any commercial/public domain software that allows me to do this? If not, any suggestions on how I can write a program to do this? Any ideas would be greatly appreciated. -Ti -- Ti Kan | vorsprung durch technik! \\\ Internet: ti@altos.com \\\ UUCP: ...!{sun|sco|pyramid|amdahl|uunet}!altos!ti /// \\\ The opinions herein are not necessarily those of Altos. ////////\
pnl@hpfinote.HP.COM (Peter Lim) (10/04/90)
> I have a large hard disk (190MB) which is now partitioned into > logical drives c: through h: with MS-DOS 3.30. I would like > to be able to access the drives d: through h: while on c: > via directory paths. For example, "cd c:\d" brings me to d:\, > and "type c:\d\file" will actually display d:\file. > This is exactly the converse of what the DOS "subst" command > allows. Is there any commercial/public domain software that > allows me to do this? If not, any suggestions on how I can > write a program to do this? > I believe it is called "JOIN". Also an MS-DOS utility. Haven't use it in the last 3 years. Heard that some program might not like it. Regards, ## Life is fast enough as it is ........ Peter Lim. ## .... DON'T PUSH IT !! >>>-------, ########################################### : E-mail: plim@hpsgwg.HP.COM Snail-mail: Hewlett Packard Singapore, : Tel: (065)-279-2289 (ICDS, ICS) | Telnet: 520-2289 1150 Depot Road, __\@/__ ... also at: pnl@hpfipnl.HP.COM Singapore 0410. SPLAT ! #include <standard_disclaimer.hpp>