kalisiak@acsu.buffalo.edu (christophe m kalisiak) (03/31/91)
I have a PDP-11/23+ based system for sale. The configuration is: 22-bit cpu box, 8 slots 11/23+ CPU 1mb memory Bootstrap for all (that I'm aware of) DEC drives on multifunction board, including the RL02's, RX02, and the RX50 mentioned below. 2 serial ports on multifunction board, with cab kit. 1 additional serial port with 25' cable. 1 Data Systems Design Mod. 880 subsystem -- 30mb drive emulating 3 RL02's, one SSDD 8" floppy drive emulating an RX02. 1 RQDX1 + RX50 + power supply; 5-1/4" floppy drive, with software to copy files between IBM-AT 1.2mb floppy drive and the RX50. I have a few more boards I can throw in to give it more memory (.5mb), and a couple more serial ports. I also have a CIpher M891-II 9-track tape drive and Emulex TC03 controller, if you are feeling crazy. As far as software goes, I have RSX-11M V4.something. I'll have to check, but it is at least V4.2D. If you really want, I have RSX-11M V4.2D, V4.4, V4.5, and V4.6 which I could sysgen into the system, but it would make my life a lot easier to take what is already on the drive. I also have most of a complete RSX-11M V4.2 doc set, which will be included in the package. Of course, the system is guaranteed to work (unless UPS plays football with the components...). I am hoping to get somewhere in the $500-$600 range, and I would like to finalize the details soon, as I need the money to buy a camera outfit. If you are interested, but think the range is too high, please let me know anyway. Depending on other offers, I may be open to bargaining. Thanks, Chris Kalisiak V076N3W7@ubvms.cc.buffalo.edu kalisiak@acsu.buffalo.edu