sbchanin@wheaties.ai.mit.edu (Steve Chanin) (08/14/90)
I have a SE/30 connected to our lab's ethernet using a NuvoLink SC (an ethernet connecter that plugs into the SCSI port rather than into the internal slot). I can't seem to get MacTCP to work with this setup and I was wondering if anyone out there had used MacTCP with a SCSI based ethernet connection. By the way, I'm running system 6.0.5 and Finder 6.1.5. The hardware works fine with the version on NCSA Telnet 2.3 which does its own TCP/IP protocol management, but I'd like to be able to run the BYU enhancements. Thanks, Steve -- =============================================================================== DOMAIN: sbchanin@ai.mit.edu USMAIL: Steven Chanin, 1010 Mass Ave #57, Cambridge, Ma 02138 PHONE : (617) 876-1950
veizades@apple.com (John Veizades) (08/15/90)
You must use MacTCP 1.0.1 to work with SCSI Ethernet connections. John Veizades... Apple Computer Inc.