lulue@manta.NOSC.MIL (Dan Lulue ) (02/28/91)
I have an fx that crashes with an id =10 error every time I launch
either NCSA Telnet or the MacEnvy CDEV. Since both of them look at the
bus, and since there is a 10 in the Slot Mgr error list ("SDM jump table
could not be initialized), do I have a hardware problem? I've done the
obvious things like taking all the inits out etc.
If you've seen this or you have a clue, I would really appreciate
hearing from you.
Sincerely,
Dan Lulue
lulue@nosc.mil