amadeus@pnet51.orb.mn.org (Christoper Helget) (02/05/91)
Two Software Questions:
1. Just having upgraded to a IIcx I've installed a fresh copy of System
6.0.7, but the "hierarchical menus" do not work. In other words, in programs
which are to have submenus, only the arrow appears. I've tried using "hierDA"
which adds submenus to DA's and the control panel but this doesn't work
either. HierDA loads but only the arrows appear with no submenu. Can I use
ResEdit to fix this? (note that these same system disks worked fine with an
SE/30).
2. What version of MacsBug should I be using with a IIcx and System 6.0.7? I
used version 6.1 on an SE/30 without a hitch. When I press the interrupt
button on the programmers switch of the IIcx I get a grey screen with no
debugging window. I have to press reset to escape and reboot. Could my
RasterOps video card (with Apple's RGB) be causing the problem?
I would appreciate any suggestions or solutions!
Email to: amadeus@pnet51.orb.mn.org
UUCP: {amdahl!bungia, uunet!rosevax, crash}!orbit!pnet51!amadeus
ARPA: crash!orbit!pnet51!amadeus@nosc.mil
INET: amadeus@pnet51.orb.mn.orgRAFI@BGUVM.BITNET (Rafi Brunner) (02/17/91)
I have the same problem with HierDA, but it occured when I upgraded to MacIIfx The CDEV is very usefull I'd love to know how to fix it to work with the FX. I checked the CDEV copatability with other inits and CDEVs but could find no collisions. Any Help from someone in NetLand? Rafi