hirchert@ncsa.uiuc.edu (Kurt Hirchert) (05/09/91)
In article <1991May3.000901.10215@seachg.uucp> jalsop@seachg.UUCP (John Alsop) writes: >Does anyone know if there is a way to configure NCSA Telnet on a Mac, so >that it will request a telnet connection on a specified port other than the >default? > >Thanks, >-- >John Alsop > >Sea Change Corporation >6695 Millcreek Drive, Unit 8 >Mississauga, Ontario, Canada L5N 5R8 >Tel: 416-542-9484 Fax: 416-542-9479 >UUCP: ...!uunet!attcan!seachg!jalsop For one-shot connections, you can just type the port number after the machine name in the Open Connection... dialog. For recurring usage, there is a port= parameter that can be used in the config.tel file. You can apply it either to a specific host or to the "default" host. See chapter 8 of the NCSA Telnet manual for more details. -- Kurt W. Hirchert hirchert@ncsa.uiuc.edu National Center for Supercomputing Applications