amadeus@pnet51.orb.mn.org (Chris Helget) (06/06/91)
If any of you know of any print spoolers that work under System 7 with the ImageWriter please let me know. I've tried: * MultiSpool - cannot be accessed under System 7 * SuperLaserSpool2.02 - crashes on startup * QuickSpool II (from GCC Technologies) - inhibits printing, get print error I've also tried PrintAid which is supposed to allow background printing but this doesn't seem to work with Microsoft Word (even with the Can Background bit set). Is there a way to get it or any of the above to work under System 7? Please reply to: Chris Helget UUCP: {amdahl!bungia, uunet!rosevax, crash}!orbit!pnet51!amadeus ARPA: crash!orbit!pnet51!amadeus@nosc.mil INET: amadeus@pnet51.orb.mn.org UUCP: {amdahl!bungia, uunet!rosevax, crash}!orbit!pnet51!amadeus ARPA: crash!orbit!pnet51!amadeus@nosc.mil INET: amadeus@pnet51.orb.mn.org
jwwalker@opusc.csd.scarolina.edu (Jim Walker) (06/08/91)
In article <5083@orbit.cts.com> amadeus@pnet51.orb.mn.org (Chris Helget) writes: >If any of you know of any print spoolers that work >under System 7 with the ImageWriter please let me know. [stuff deleted] >I've also tried PrintAid which is supposed to allow background printing >but this doesn't seem to work with Microsoft Word (even with the Can >Background bit set). Is there a way to get it or any of the above to work >under System 7? Some things changed in System 7 which prevented PrintAid from de-modalizing modal dialogs. The new version 1.4, which I just mailed to some FTP sites (sumex-aim, rascal, mac.archive), will work under System 7. Also, it is easier to use, as it does not require the use of ResEdit. -- Jim Walker walkerj@math.scarolina.edu -- -- Jim Walker 76367.2271@compuserve.com walkerj@math.scarolina.edu