nwc@galileo.shearson.com (Nick Christopher) (01/17/91)
I just used the "command-f before print ok" trick to get postscript from MS Word. Problem was that the postscript I got seemed like trash. When I moved it to a sun and looked at it with a software postscript interpreter there were all sorts of undifined operators... Does MS Word first dowlown some homemade postscript operators which it then uses in all it printing? If so can there definitions be obtained? My goal here is to get usable (by any postscript interpreter) postscript from MS Word on the MAC. -- \n Nicholas Christopher (212) 464-3837 Internet: nwc@sisyphus.shearson.com uunet: uunet!sisyphus.shearson.com!nwc
sam@wolfen.cc.uow.oz (Sam Tan) (01/18/91)
nwc@galileo.shearson.com (Nick Christopher) writes: >I just used the "command-f before print ok" trick to get postscript from MS >Word. Problem was that the postscript I got seemed like trash. When I moved it >to a sun and looked at it with a software postscript interpreter there were all >sorts of undifined operators... >Does MS Word first dowlown some homemade postscript operators which it then >uses in all it printing? >If so can there definitions be obtained? >My goal here is to get usable (by any postscript interpreter) postscript from >MS Word on the MAC. The LaserPrep driver is downloaded to the LW before any printing is done. To obtain a PostScript file including this Prep, use Cmd-K instead of Cmd-F. Enjoy! sam@wolfen.cc.uow.edu.au