larry@nstar.uucp (Larry Snyder) (11/05/90)
well - like I said in a previous article SLIP works with the 4.56 Intelliport drivers from Computone - but after leaving the system up while I took the kids out to the Olive Garden for lunch - I noticed that someone had been having problems getting a connect with one of the trailblazers. Further research and guess what? The Computone 4.56 drivers don't work real well with bi-directional communications. I called into the port that the caller was having problems on - and it was dead. The computone utilities ttyoff didn't toggle DTR on the port (like it normally does when it turns the port off). Further research - and the port appears to not accept inbound calls after using it to originate calls. Great - aren't we having fun. Hmm. I installed the 4.31 drivers (which work fine - except for SLIP). -- Larry Snyder, Northern Star Communications, Notre Dame, IN USA {larry@nstar, uunet!sco!romed!nstar!larry, nstar%larry@iuvax.cs.indiana.edu} backbone usenet newsfeeds available Public Access Unix Site (219) 289-0282 (5 high speed lines)