kla@kampi.hut.fi (Kimmo Laaksonen) (04/18/91)
After some uptime (a week, perhaps less) our STS-10x's reach this state. If I try to do 'show conf', 'write term' &c, I get that message. 'conf terminal' seems to work, but I can't save the configuration, since 'write memory' gives the same error message. I'm running 8.2(2) from ftp.cisco.com, because we had some trouble with 8.2(1) in the ROM. (Line defaults not getting reset when user quits, No memory available (!); both are corrected according to the release notes - if "System modifications were made to prevent unexpected memory loss with the STS-10x terminal servers." refers to the same phenomenon. Line dafaults are getting reset properly - no more funny settings like no parity, 7 data, 1 stop; I didn't believe this until I verified it myself.) Anybody else had "No memory available" on a STS-10x? PS. Anybody tried the new extended TACACS? I turned it on, got a validation request and a system reload in my log, then nothing. Maybe that is because of memory loss, too? ------------------------------------------------------------------------ Kimmo Laaksonen Internet: kla@hut.fi Helsinki University of Technology uucp: ..!mcsun!tut!santra!kla Computing Centre BITNET: KLA@FINGATE Otakaari 1, SF-02150 Espoo, Finland phone: int'l 358 0 451 4308