[comp.dcom.sys.cisco] Logging Levels

RRH@vm.nrc.ca (04/23/91)

Hi,
I did post this previously and somebody from  cisco (ralls@cisco.com)
did reply, wanting to know the Cisco's version etc. I have supplied
that info. Since there has been no reply, please excuse a repeat.

Ratilal Haria

*************************************************************************

Can somebody tell me at what level is the following message:

     BF:  buffer in list, PC=50294, ptr=AB45C
    Process="Novell SAP", pid=17, level= 0

The reason I am asking is that these are the only messages I am getting
when I have logging trap set warnings. So are these warnings, errors, critical
etc. and what does it mean and how can I fix it.

------------------------------CISCO VERSION------------------------------

GS Software (GS2-X), Version 8.1(14)
Copyright (c) 1986-1990 by cisco Systems, Inc.
Compiled Wed 02-May-90 21:20

System Bootstrap, Version 4.2(4)

m60gate uptime is 4 days, 5 hours, 16 minutes
System restarted by reload
Running default software

CSC2 (68020) processor with 1024K bytes of memory.
X.25 software.
3 MCI controller.
6 Ethernet/IEEE 802.3 interface.
4 Serial network interface.
32K bytes of non-volatile configuration memory.
Configuration register is 0x301
****
?ralls@cisco.com     RRH@VM.NRC.CA        4/12/91*Logging Message level

bergum@SRC.Honeywell.COM (David Bergum) (04/24/91)

In article <1991Apr23.191425.29254@nrcnet0.nrc.ca> RRH@vm.nrc.ca writes:


RRH> Hi,
RRH> I did post this previously and somebody from  cisco (ralls@cisco.com)
RRH> did reply, wanting to know the Cisco's version etc. I have supplied
RRH> that info. Since there has been no reply, please excuse a repeat.

RRH> Ratilal Haria

RRH> *************************************************************************

RRH> Can somebody tell me at what level is the following message:

RRH>      BF:  buffer in list, PC=50294, ptr=AB45C
RRH>     Process="Novell SAP", pid=17, level= 0

RRH> The reason I am asking is that these are the only messages I am getting
RRH> when I have logging trap set warnings. So are these warnings, errors, critical
RRH> etc. and what does it mean and how can I fix it.

It's just an innocuous message.  I heard it was a debugging message that
did not get taken out.  It goes away in 8.2

      A
-----/|\---------------------------------------+
-   / | \   Bergum@CIM-VAX.Honeywell.COM       |
-  /__|__\  Dave Bergum [MN26-3190]            |
-  t--'--/   2701 4-th Ave. S., Mpls, MN 55408 |
-~~~~~~~~~~  (612)870-5839                     |
-----------------------------------------------+