shatara@islnds.enet.dec.com (Chris Shatara) (07/30/90)
I have my PCTransporter in my GS configured with the Imagewriter II print
driver (IW2EMUL). The IW2 is configured for a default of 10 cpi. What I
need is to be able to fill in the following table with the proper control
codes. I've tried some codes I've gotten from a Tandy manual with an IBM
compatible mode but these don't seem to work.
Attribute Code-ON Code-OFF
----------------------------------------------------
WORK:
Emphasized ESC E ESC F space only for
Double Strike ESC G ESC H clarity
NEED:
UNDERLINE
DOUBLE WIDTH
10 CPI
12 CPI
17 CPI
Any help in filling out this table will be appreciated. I'll publish the
table if I can complete it.
Thanks....Chris
=============================================================================
| Chris Shatara | Internet: shatara@islnds.enet.dec.com|
| Opinions expressed are | DEC Easynet: islnds::shatara |
| mine and mine only! | UUCP: ...!decwrl!islnds!shatara |
=============================================================================