marekp@pnet91.UUCP (Marek Pawlowski) (08/25/90)
I have my own problem concerning PR#x and IN#x. Originally, I had a
program of mine, set IN#x and PR#x through Applesoft Basic. Then the rest of
the program was in assembly. I would greatly appreciate it if someone could
tell me how to "PR#x" and "IN#x" a slot, defined by "x", through assembly.
Please answer to private mail, at the following addresses:
marekp@contact.uucp [..uunet!contact!marekp]
root@aunix.uucp [..uunet!contact!aunix!root]
marekp@generic.uucp [..uunet!bkj386!generic!marekp]
marekp@pnet91.uucp [..uunet!bkj386!generic!pnet91!marekp]
I will post a summary to the newsfeed. But since my comp.sys.apple2
newsfeed has been temporarily cut, I would appreciate a provate mail follow
up. Thanks in advance. I need a reply as soon as possible..
Marek Pawlowski..
Marek Pawlowski || Intelligent Twist Software || You like bang-paths?
marekp@contact.uucp || 250 Harding Blvd. ||
root@aunix.uucp || PO Box 32017 || uunet!contact!marekp
marekp@generic.uucp || Richmond Hill, Ontario ||
marekp@pnet91.uucp || L4C 9M7 CANADA ||