mitchell@tci.UUCP (Rob Mitchell) (08/31/90)
Hiya, I in deep do-do on this one. I just installed CV Technology's SCSI/DMA card in my IIGS and reset the Control Panel to boot from slot 3 (are slots numbered left to right?). Flipping the power switch results in my monitor displaying some nice colors and blurps and nothing boots. I moved the SCSI/DMA card to other slots, but to no avail. Does anyone know how to reset the Control Panel to scan after you have already set it to a particular slot AND you cannot boot? I'm going to call Computer Factory (oh dread), the place I purchased everything. Thanks in advance!!! Rob Mitchell Technology Concepts Inc. Sudbury, MA. 01776 (508) 443-7311 Bitnet: ...!uunet!tci!mitchell Internet: mitchell@tci.bell-atl.com America Online: RobertM308 Steep and Deep ... The only way!! These are my opinions only.
shatara@islnds.enet.dec.com (Chris Shatara) (09/02/90)
In article <501@tci.UUCP>, mitchell@tci.UUCP (Rob Mitchell) writes... > Does anyone know how to reset the Control Panel to scan after >you have already set it to a particular slot AND you cannot boot? > Rob, Just hold the "OPTION" key down while powering up the machine. You will be presented with a menu where if you type 1, you get into the control panel. /chris ============================================================================= | Chris Shatara | Internet: shatara@islnds.enet.dec.com| | Opinions expressed are | DEC Easynet: islnds::shatara | | mine and mine only! | UUCP: ...!decwrl!islnds!shatara | =============================================================================