UD151606@NDSUVM1.BITNET (Steve Drees) (09/08/90)
Has anyone out there had any luck getting AWGS to recognize an Epson LX-800 printer? My setup is as follows: Rom 03 GS (3 Megs RAM), SMT parallel interface (in slot1 with slot1 set to Your Card) 1 3.5" drive., Zoom modem in slot2. Any help will be greatly appreciated. ------- +-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+ | Steve Drees | Can you feel the pain he feels as the nails go | | UD151606@NDSUVM1 | through his hands? -The Violet Burning | +-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+
jazzman@claris.com (Sydney R. Polk) (09/12/90)
From article <4587UD151606@NDSUVM1>, by UD151606@NDSUVM1.BITNET (Steve Drees): > Has anyone out there had any luck getting AWGS to recognize an Epson LX-800 > printer? My setup is as follows: Rom 03 GS (3 Megs RAM), SMT parallel interface > (in slot1 with slot1 set to Your Card) 1 3.5" drive., Zoom modem in slot2. > > Any help will be greatly appreciated. > ------- > +-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+ > | Steve Drees | Can you feel the pain he feels as the nails go | > | UD151606@NDSUVM1 | through his hands? -The Violet Burning | > +-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+ You have to install the card and printer driver using the Installer and then set it up in the Control Panel. Unfortunately, I do not believe that your interface card is supported. You also need to make sure you have System 5.0.2 or later, because they did a lot of work on the Epson driver. (It also helps if you have AWGS 1.1. It's a lot friendlier about memory and prints better as a result.) -- Syd Polk | Wherever you go, there you are. jazzman@claris.com | Let the music be your light. GO 'STROS! | These opinions are mine. Any resemblence to other GO RICE! | opinions, real or fictitious, is purely coincidence.