george@flight.UUCP (George Rachor ) (09/25/90)
> First of all, I don't understand why you are bothering with a Super > Serial Card. why not just put a switch box on port 2 so you can > switch between the two connections. That's what I do and it I had the super serial card and didn't have a switchbox. I have different pieces of software to talk to different hosts. (America online at 2400 baud for one and a xenix host at 9600 for another Note: currently set at 2400 also because of dropping characters at a higher baud rate). > You say that you have interupts enabled on your SSC. This sounds > questionable. Are you sure? What ROM version do you have. I have > the second ROM (ie. the one that displays ROM 01, not the original > old ROM.) > > Les Ferch > Computing Services > University of British Columbia I believe the interrupts are enabled because the other switch position on the Super serial card fails to work at all! I have a ROM 01 gs. Will the internal serial port handle the a higher baud rate then the super serial card? -- George Rachor Jr. Intel Corporation Hillsboro, OR 97124 george@flight.hf.intel.com