ornat@iris.cs.unc.edu (Steven Ornat) (10/30/90)
Need some advice for making a printer cable. Just bought a //e clone (Laser 128) and I would like to connect a parallel printer to it. What I need is the wiring from the normal parallel centronics connector to the DB-15 that is used on the rear of the Laser 128. Any help would be appreciated. AdvaTHANKSnce SteveO ############################################################################# Steven M. Ornat The University of North Carolina Department of Computer Science Telephone: (919) 962-1818 CB # 3175, Sitterson Hall Fax: (919) 962-1799 Chapel Hill, NC 27599-3175 Internet: ornat@cs.unc.edu #############################################################################
greyelf@wpi.WPI.EDU (Michael J Pender) (11/02/90)
In article <17163@thorin.cs.unc.edu> ornat@iris.cs.unc.edu (Steven Ornat) writes: >Need some advice for making a printer cable. > >Just bought a //e clone (Laser 128) and I would like to connect a >parallel printer to it. What I need is the wiring from the normal >parallel centronics connector to the DB-15 that is used on the rear >of the Laser 128. When I bought my Laser a cable came with it for free that does parallel to centronics. Last I looked Laser sells one for about $25, but the connector for the back of the laser is pretty non-standard if I remember right. I have the tech documentation at home and can look it up, but you may have already received a more promising reply. If not, drop me a line. -- --- Michael J Pender Jr Box 1942 c/o W.P.I. Part of this D- belongs to greyelf@wpi.bitnet 100 Institute Rd. God...