96975089@WSUVM1.CSC.WSU.EDU (Ken Smith) (11/30/90)
# Inter-Network Mail Guide - Copyright 1990 by John J. Chew
# $Header: netmail,v 1.10 90/04/30 18:30:36 john Exp $
#
# COPYRIGHT NOTICE
#
# This document is Copyright 1990 by John J. Chew. All rights reserved.
# Permission for non-commercial distribution is hereby granted, provided
# that this file is distributed intact, including this copyright notice
# and the version information above. Permission for commercial distribution
# can be obtained by contacting the author as described below.
#
# If you plan to redistribute this list on a regular basis in a
# non-commercial medium, please send me mail. I can then arrange to
# mail you each new edition and save you the trouble of fetching it
# from a newsgroup.
#
#
# INTRODUCTION
#
# This file documents methods of sending mail from one network to another.
# It represents the aggregate knowledge of the readers of comp.mail.misc
# and many contributors elsewhere. If you know of any corrections or
# additions to this file, please read the file format documentation below
# and then mail to me: John J. Chew <poslfit@gpu.utcs.utoronto.ca>. If
# you do not have access to electronic mail (which makes me wonder about
# the nature of your interest in the subject, but there does seem to be
# a small such population out there) you can call me between 14:00 and
# 18:00 Eastern Time (UTC-4h or UTC-5h depending on the time of year) at
# +1 416 425 3818.
#
#
# HOW TO USE THIS GUIDE
#
# Each entry in this file describes how to get from one network to another.
# To keep this file at a reasonable size, methods that can be generated by
# transitivity (A->B and B->C gives A->B->C) are omitted. Entries are sorted
# first by source network and then by destination network. This is what a
# typical entry looks like:
#
# #F mynet
# #T yournet
# #R youraddress
# #C contact address if any
# #I send to "youraddress@thegateway"
#
# For parsing purposes, entries are separated by at least one blank line,
# and each line of an entry begins with a `#' followed by a letter. Lines
# beginning with `# ' are comments and need not be parsed. Lines which do
# not start with a `#' at all should be ignored as they are probably mail
# or news headers.
#
# #F (from) and #T (to) lines specify source and destination networks.
# If you're sending me information about a new network, please give me
# a brief description of the network so that I can add it to the list
# below. The abbreviated network names used in #F and #T lines should
# consist only of the characters a-z, 0-9 and `-' unless someone can
# make a very convincing case for their favourite pi character.
#
# These are the currently known networks with abbreviated names:
#
# applelink Apple Computer, Inc.'s in-house network
# bitnet international academic network
# bix Byte Information eXchange: Byte magazine's commercial BBS
# bmug Berkeley Macintosh Users Group
# compuserve commercial time-sharing service
# connect Connect Professional Information Network (commercial)
# envoy Envoy-100 (Canadian commercial mail service)
# fax Facsimile document transmission
# fidonet PC-based BBS network
# geonet GeoNet Mailbox Systems (commercial)
# ieee-compmail A DIALCOM system supporting IEEE users
# internet the Internet
# mci MCI's commercial electronic mail service
# mfenet Magnetic Fusion Energy Network
# nasamail NASA internal electronic mail
# peacenet non-profit mail service
# sinet Schlumberger Information NETwork
# span Space Physics Analysis Network
# telemail Telenet's commercial mail service
# thenet Texas Higher Education Network
# usdamail A DIALCOM system supporting USDA researchers
#
# #R (recipient) gives an example of an address on the destination network,
# to make it clear in subsequent lines what text requires subsitution.
#
# #C (contact) gives an address for inquiries concerning the gateway,
# expressed as an address reachable from the source (#F) network.
# Presumably, if you can't get the gateway to work at all, then knowing
# an unreachable address on another network will not be of great help.
#
# #I (instructions) lines, of which there may be several, give verbal
# instructions to a user of the source network to let them send mail
# to a user on the destination network. Text that needs to be typed
# will appear in double quotes, with C-style escapes if necessary.
#F applelink
#T internet
#R user@domain
#I send to "user@domain@internet#"
#I domain can be be of the form "site.bitnet", address must be <35 characters
#F bitnet
#T internet
#R user@domain
#I Methods for sending mail from Bitnet to the Internet vary depending on
#I what mail software is running at the Bitnet site in question. In the
#I best case, users should simply be able to send mail to "user@domain".
#I If this doesn't work, try "user%domain@gateway" where "gateway" is a
#I regional Bitnet-Internet gateway site. Finally, if neither of these
#I works, you may have to try hand-coding an SMTP envelope for your mail.
#I If you have questions concerning this rather terse note, please try
#I contacting your local postmaster or system administrator first before
#I you send me mail -- John Chew <poslfit@gpu.utcs.utoronto.ca>
#F compuserve
#T fax
#R +1 415 555 1212
#I send to "FAX 14155551212" (only to U.S.A.)
#F compuserve
#T internet
#R user@domain
#I send to ">INTERNET:user@domain"
#F compuserve
#T mci
#R 123-4567
#I send to ">MCIMAIL:123-4567"
#F connect
#T internet
#R user@domain
#I send to CONNECT id "DASNET"
#I first line of message: "\"user@domain\"@DASNET"
#F envoy
#T internet
#R user@domain
#I send to "[ID=\"attbl!uunet!domain!user\" @UUCP]ATTMAIL/USA"
#I or to "[MAIL @NASA]NASAMAIL/TELEMAIL/US" with first line "To: user@domain"
#F fidonet
#T internet
#R user@domain
#I send to "uucp" at nearest gateway site
#I first line of message: "To: user@domain"
#F geonet
#T internet
#R user@domain
#I send to "DASNET"
#I subject line: "user@domain!subject"
#F ieee-compmail
#T internet
#R user@domain
#I send to "INTERMAIL (134:CMP0817)"
#I first line of body: "Forward: ARPA"
#I second line of body: "To: user@domain"
#I third line of body: "" (blank)
#F internet
#T applelink
#R user
#I send to "user@applelink.apple.com"
#F internet
#T bitnet
#R user@site
#I send to "user%site.bitnet@gateway" where "gateway" is a gateway host that
#I is on both the internet and bitnet. Some examples of gateways are:
#I cunyvm.cuny.edu mitvma.mit.edu. Check first to see what local policies
#I are concerning inter-network forwarding.
#F internet
#T bix
#R user
#I send to "user@dcibix.das.net"
#F internet
#T bmug
#R John Smith
#I send to "John.Smith@bmug.fidonet.org"
#F internet
#T compuserve
#R 7xxxx,yyy
#I send to "7xxxx.yyy@compuserve.com"
#F internet
#T connect
#R NAME
#I send to "NAME@dcjcon.das.net"
#F internet
#T envoy
#R John Smith (ID=userid)
#C /C=CANADA/ADMD=TELECOM.CANADA/ID=ICS.TEST/S=TESTGROUP/@nasamail.nasa.gov
#C for second method only
#I send to "uunet.uu.net!att!attmail!mhs!envoy!userid"
#I or to
#I "/C-CANADA/ADMD=TELECOM.CANADA/ID=userid/G=John/S=Smith/@nasamail.nasa.gov"
#F internet
#T fidonet
#R john smith at 1:2/3
#I send to "john.smith@f3.n2.z1.fidonet.org"
#F internet
#T geonet
#R user at host
#I send to "user:host@map.das.net"
#I American host is geo4, European host is geo1.
#F internet
#T ieee-compmail
#R CMP1234
#C Commercial Mail Relay <Intermail-Request@Intermail.ISI.EDU>
#I send to "CMP1234%COMPMAIL@Intermail.ISI.EDU>
#F internet
#T mci
#R John Smith (123-4567)
#I send to "1234567@mcimail.com"
#I or send to "JSMITH@mcimail.com" if "JSMITH" is unique
#I or send to "John_Smith@mcimail.com" if "John Smith" is unique - note the
#I underscore!
#I or send to "John_Smith/1234567@mcimail.com" if "John Smith" is NOT unique
#F internet
#T mfenet
#R user@mfenode
#I send to "user%mfenode.mfenet@nmfecc.arpa"
#F internet
#T nasamail
#R user
#C <postmaster@ames.arc.nasa.gov>
#I send to "user@nasamail.nasa.gov"
#F internet
#T peacenet
#R user
#C <support%cdp@arisia.xerox.com>
#I send to "user%cdp@arisia.xerox.com"
#F internet
#T sinet
#R node::user or node1::node::user
#I send to "user@node.SINet.SLB.COM" or "user%node@node1.SINet.SLB.COM"
#F internet
#T span
#R user@host
#C <NETMGR@nssdca.gsfc.nasa.gov>
#I send to "user@host.span.NASA.gov"
#I or to "user%host.span@ames.arc.nasa.gov"
#F internet
#T telemail
#R [user/organization]system/country
#C <Intermail-request@intermail.isi.edu>
#I send to "\"[user/organization]system/country%TELEMAIL\"@intermail.isi.edu"
#F internet
#T thenet
#R user@host
#I send to "user%host.decnet@utadnx.cc.utexas.edu"
#F internet
#T usdamail
#R AGS1234
#C Commercial Mail Relay <Intermail-Request@Intermail.ISI.EDU>
#I send to "AGS1234%USDAMAIL@Intermail.ISI.EDU>
#F mci
#T internet
#R John Smith <user@domain>
#I at the "To:" prompt type "John Smith (EMS)"
#I at the "EMS:" prompt type "internet"
#I at the "Mbx:" prompt type "user@domain"
#F nasamail
#T internet
#R user@domain
#I at the "To:" prompt type "POSTMAN"
#I at the "Subject:" prompt enter the subject of your message
#I at the "Text:" prompt, i.e. as the first line of your message,
#I enter "To: user@domain"
#F sinet
#T internet
#R user@domain
#I send to "M_MAILNOW::M_INTERNET::\"user@domain\""
#I or "M_MAILNOW::M_INTERNET::domain::user"
#F span
#T internet
#R user@domain
#C NETMGR@NSSDCA
#I send to "AMES::\"user@domain\""
#F telemail
#T internet
#R user@domain
#C <Intermail-Request@intermail.isi.edu>
#I send to [INTERMAIL/USCISI]TELEMAIL/USA
#I first line of message: "Forward: ARPA"
#I second line of message: "To: user@domain"
#F thenet
#T internet
#R user@domain
#I send to UTADNX::WINS%" user@domain "
#F usdamail
#T internet
#R user@domain
#I send to "INTERMAIL (157:AGS9999)"
#I first line of body: "Forward: ARPA"
#I second line of body: "To: user@domain"
#I third line of body: "" (blank)
Ken Smith
Internet: 96975089@wsuvm1.csc.wsu.edu
ksmith@cs2.cs.wsu.edu
Bitnet: 96975089@WSUVM1
----------------------------------------