mrapple@quack.sac.ca.us (Nick Sayer) (12/04/90)
Whenever I try to decode with GScii, I suddenly find that after I choose the BINSCIId file, my boot volume is unmounted and disappears! Has anyone else encountered similar shenanigans? -- Nick Sayer | Disclaimer: "Don't try this at home, | RIP: Mel Blanc mrapple@quack.sac.ca.us | kids. This should only be done by | 1908-1989 N6QQQ [44.2.1.17] | trained, professional idiots." | May he never 209-952-5347 (Telebit) | --Plucky Duck | be silenced.
JDA@CU.NIH.GOV ("Doug Ashbrook") (12/04/90)
> Whenever I try to decode with GScii, I suddenly find that after > I choose the BINSCIId file, my boot volume is unmounted and > disappears! Has anyone else encountered similar shenanigans? > > Nick Sayer | Disclaimer: "Don't try this at home, | RIP: Mel Blan > mrapple@quack.sac.ca.us | kids. This should only be done by | 1908-1989 Now that you mention it, I was never able to get GScii to work either. I would boot from my hard disk in slot 7 and select a file on the hard disk to be processed, and GScii would keep polling my 3.5" disks connected to the smartport (slot 5). I figured that maybe the author did not have drives in different slots and had never tested such a configuration. ==================================================================== J. Douglas Ashbrook (301) 402-1248 INTERNET: JDA@CU.NIH.GOV BITNET: JDA@NIHCU National Institutes of Health, Computer Center, Bethesda, MD 20892