jarr@pro-micol.cts.com (John Farris) (05/10/91)
That is really wierd Scott, I have the last revision and I have an expansion port. There is a simple solution if you want to have a longer cable to the board, make your own, it's not that hard. If you want to go this route then go down to Computronics at the corner of Spadina and Queen <on the south east corner>. If you go, take off the cable to the card by pulling straight out and take it to the store; go down to the back of the store, that's where Sid works. Show him the connecters and cable and he will get you want you need, don't forget to ask for instructions to put it together. I had to go this route, one of the pins on my mtherbord connector broke so I had no choise. Doing something like this will probably void the warrenty on the card but if you uprade it at all by yourself then it will happen anyway. I hope I was some help. John ---- ProLine: jarr@pro-micol Internet: jarr@pro-micol.cts.com UUCP: crash!pro-micol!jarr ARPA: crash!pro-micol!jarr@nosc.mil