[comp.sys.apple2] HyperC executable under ProDOS - How?

fjs3367@isc.rit.edu (F.J. Schwalm) (05/07/91)

I have HyperC running on a IIc, and I have an important question.  How do I 
make an executable that will run outside of the HyperC shell (ie: in ProDOS)?
Support on my part to the apple community depends on this.

I've tried making both the compiled and assembled versions system files with
the mksys command, and nothing I can do will get either of them to run under
ProDOS.  Has anybody had any success in getting a HyperC compiled program
running under ProDOS?  If so, how did you do it?

		Nutrocker --

===============================================================================
==   '91 DCI - DALLAS, TX   ==   "Were the blades of grass and arrows rain   ==
==     '90 CoBC - 97.7      ==   Then there'd be no sorrow, be no pain..."   ==
==============================                                               ==
== fjs3367@ultb.isc.rit.edu ==      -- Emerson, Lake & Palmer -- Battlefield ==
===============================================================================
==    Enjoy yourself !!  If you can't enjoy yourself, enjoy someone else.    ==
===============================================================================

ericmcg@pnet91.cts.com (Eric Mcgillicuddy) (05/11/91)

No can do.     The problem is that it assumes the file "opsys" is loaded in
memory from 0x800 to 0x2000 and the compiler does not link in certain critical
I/O routines included here. Basically it saves space since the shell uses
these routines as do 90% of the programs most people are likely to write.

I suggest you rename your application to "shell" and include Prodos, OPSYS and
SHELL with your disks. Well, at least OPSYS and SHELL.

UUCP: bkj386!pnet91!ericmcg
INET: ericmcg@pnet91.cts.com

glaeske@plains.NoDak.edu (Brian Glaeske) (05/12/91)

In article <710@generic.UUCP> ericmcg@pnet91.cts.com (Eric Mcgillicuddy) writes:
>I suggest you rename your application to "shell" and include Prodos, OPSYS and
>SHELL with your disks. Well, at least OPSYS and SHELL.

This is what the Hyperc prodos manual says to do also.  Anyway, the HyperC
is actually NIC.
-- 
Brian Glaeske
 -  /|                        glaeske@plains.NoDak.edu  [Internet] 
  o.O`   --Ooop ACK!!         ..!uunet!plains!gehenna!brian [NeXT UUCP]
=(___)=                      
   U    "Bloom County Forever!!"