marcr@marque.mu.edu (Marc R.) (05/29/91)
I have a problem with a Grapler card and a Daisy wheel printer. The printer and cable work fine on an IBM system, and when the printer is hooked up to a ][+ via a grappler card, the printer will print for anywherre from 10 to 300 characteres, and then stop. I know the buffer is not being filled as I can hit a key (after doing a PR#1) and the printer will output said character. I can then hit a different key and again, a different letter will be processed. Does the net have any ideas? My next step is to test the chips on the Grappler..... Also, E-mail any replies, as I do not gread this newsgroup. -- Marc Rassbach marcr@marque.mu.edu If you take my advice, that MS-DOS - it's not marc@milestn.mke.wi.us is your problem, not mine! my problem! If it was said on UseNet, it must be true. Unix - It's a nice place to live, but you don't want to visit there.